Quick Release Aero Bar
Will the aerobars fit non-round (aero-shaped) handlebars?
The handlebar clamps for the Quick-Release Aerobars need at least 22mm (7/8 inch) of straight, cylindrical handlebar on either side of the stem to clamp properly. Some aero-shaped handlebars have a sufficiently wide cylindrical section in the...
Are the Redshift Quick-Release Aerobars legal to use in a triathlon race?
Yes! The Redshift Quick-Release Aerobars are legal for use in any non-drafting triathlon. That includes all Ironman events, USAT sanctioned events, and the vast majority of triathlons worldwide. The only events where our aerobars are not permitted...
How do aerobars affect my bike fit?
This is a really important question, and it's one that we've spent a lot of time thinking about here at Redshift Sports, so get ready for a long answer! Aerobars (of any brand) work by rotating your upper body forward so that it is more parallel...
What adjustments can I make to the aerobars?
Redshift's Quick-Release aerobars are incredibly adjustable. You can adjust the following characteristics to fine-tune your fit: - Extension reach and roll - Armrest pad fore-aft position - Armrest pad width - Armrest pad rotation - Aerobar stack...
What kind of testing do you do to qualify the aerobars?
All Redshift Sports components are tested to the latest ISO 4210 standard for Racing Bicycles. These standards typically specify "Static Strength" tests (i.e. one-time application of force) as well as "Fatigue" tests (i.e. repeated application of...
Are the quick-release aerobars compatible with my carbon handlebar?
Most likely. Redshift Quick-Release Aerobars are generally compatible with carbon fiber handlebars, as long as there is at least 22mm (7/8 inch) of straight, cylindrical handlebar on either side of the stem to clamp properly. However, there are...
Should I choose L-Bend or S-Bend extensions?
If you don't have any previous experience using aerobars, we typically recommend the L-Bend because they put your wrists and arms in a more comfortable, ergonomic position. This is usually a better fit for triathletes and long-distance riders. If...
Will riding with aerobars compromise my bike's handling?
Nope! We specifically designed the Quick-Release Aerobars in conjunction with the Dual-Position Seatpost to provide an optimized riding position on a road bike. Obviously, riding on aerobars is different than riding on the normal handlebars - you...
How much faster will I ride with aerobars?
Great question! Obviously, individual results will vary based on your particular bike, setup, and body, but most people can expect to ride 1-1.5 mph (1.5-2.5 kph) faster at the same power output when you ride in the aero position (vs. riding with...
Can I use another manufacturer's aerobar extension with your quick-release mechanism?
Redshift Quick-Release Aerobars have industry-standard 22.2mm diameter extensions, which means that they are compatible with many other aerobar manufacturers' extensions, including Profile Design and Zipp. There are a number of manufacturers who...
How do I attach or remove the aerobars?
For step-by-step guidance on attaching and removing the aerobars, check out the instructional videos on our website here under the Instructions tab.
Do the armrest pads flip up?
The armpads on the Redshift Quick-Release Aerobars do not flip up. We decided that the small added benefit of flip-up armrests was not worth the additional complexity, weight, and cost that would be required. Most riders choose to simply rest...
Can I use the Water Bottle Mount and the Utility Mount for the Aerobars at the same time?
Yes, the water bottle mount includes a threaded mount hole that allows the computer mount to be mounted directly to the water bottle mount. That way your bike computer is still visible even with the water bottle installed.
Does the Aerobar Utility Mount come off with the Quick-Release Aerobars?
In its standard mounting location, the utility mount attaches directly to the bottom of the handlebar clamps, which stay attached to your bicycle when you remove the aerobars. This means that your bike computer remains in position regardless of...
Is the Water Bottle Mount compatible with other hydration systems from Profile Design, XLab, Speedfil, etc.?
The Redshift mounting plate has a standard water bottle cage mount bolting pattern, so any standard water bottle cage can be attached to the mount plate. Any hydration system that attaches via a standard cage mounting pattern should be compatible....
Will the water bottle stay put in the Water Bottle Mount while riding over rough roads?
Yes. We specifically chose the Arundel Bando water bottle cage because it provides a tight grip on the water bottle. If you need a tighter grip, you can use the band it comes with to compress the cage more.
Does the Water Bottle Mount come off with the Quick-Release Aerobars?
Yes, the water bottle mount is attached to one of the two quick-release aerobars. That means that when you remove the aerobars, the water bottle mount also comes off and stays attached to the aerobar.
Can I wash the armpads?
Yes. You can hand-wash and air-dry the armpads to keep them fresh. Just use mild dish or laundry detergent. Avoid the washing machine or dryer since they can damage the pads. Also, avoid direct exposure to sunlight while drying the pads to keep...
Can I fit my hands under the Aerobars on my original handlebar?
From the top of an unwrapped 24mm diameter handlebar (the diameter outside of the tapered region) to the underside of the extension clamp is about 30mm. It's about 35mm to the underside of the armrest pad. Keep in mind that bar tape will affect...
What are the benefits of Aerobars?
Great question! Check out this blog post we did all about it: https://redshiftsports.com/blog/cat/general/post/triathlon-101-a-guide-to-aero-bars-for-road-bikes/
What is the angle of the L-bend Aerobars?
It's 40 degrees from horizontal
Riser Kit - Quick-Release Aerobar
The current Aerobar extension riser kit on our website is ONLY compatible with Quick-Release Aerobars sold after January 2020. If your aerobars have the older 12mm tall Dovetail Clamp, DO NOT USE this riser kit. Instead, please contact us at...
Can I mount gear shifters on my aerobar extensions?
Yes, with some qualifications. The extensions are industry-standard 22.2mm diameter that will fit most standard bar-end type shifters designed for aerobars, however, because the aerobars are quick-release, we do not recommend the use of standard...